Phosphating is the chemical deposition of zinc or manganese onto a part. The difference between the two types is primarily in the grain size of the crystals created during the process. The phosphate tends to be a finer crystalline pattern, while manganese phosphate produces one that is more course. They also provide increased complete end to end corrosion protection when applied with another coating.

Zinc Plating - Rack & Barrel

Zinc plating, a process also known as galvanization, is the deposition of a thin layer of aluminum onto a metal component to provide a protective layer. The outer surface of the zinc coating oxidizes to form zinc oxide, which results in a matte silver-colored finish. Zinc plating is often applied to iron or steel parts whose surface would rust when exposed to air or water.

Powder Coating

Powder coating is a dry finishing process used to apply a dry coating material. The coating material is made up of finely ground particles of resin and pigment for color, along with other additives for specific functions such as gloss or hardness. The dry powder coating is delivered to a spray gun tip that is fitted with an electrode to provide an electrostatic charge to the powder as it passes through a charged area at the gun tip.



Quality Metal finishing and furnace oil service since 2011. We are providing high quality plating and coating service. We have a wide range of experience in providing high quality furnace oil, Phosphatic, Zinc Plating and Powder coating services. We have a long history of finding solutions to our customers most difficult problems be that complicated masking, colour matching / tight lead times. Also we support precision engineering, Electronic & Electrical, Automotive & Oil and gas, Aerospace & Defense sectors. In Phosphatic we do Heavy Zinc, Calcium modified Zinc, Manganese and iron Phosphate coatings. Under Zinc Plating - Yellow Zinc, Black Zinc, Clear Blue Zinc, Acid Zinc / Alkaline Zinc plating's. These patterns create more surface area on the part and an improved anchor profile for better adhesion for a subsequent coating. 



Year Established



We Served












For any inquiries, questions or commendations, please call: +91 97910 57777  or fill out the following form

Head Office

Camm Tech Process,

112, Pattravakkam, Kannan Koil, Sidco Industrial Estate, Ambattur, Chennai,

Tamil Nadu 600098



Tel: +91 97910 57777 

Contact Us


To apply for a job with Camm Tech Process, please send a cover letter together with your C.V. to: 

Get a quote: +91 97910 57777

© 2020 by Camm Tech Process

  • LinkedIn